In chemical industries, fast and strongly exothermic reactions are often to be carried out to synthesize a number of intermediates and final desired products. Such processes can exhibit a phenomenon known as “thermal runaway” that consists in a reactor temperature loss of control. During the course of the years, lots of methods, aimed to detect the set of operating parameters (e.g., dosing times, initial reactor temperature, coolant temperature, etc..) at which such a dangerous phenomenon can occur, have been developed. Moreover, in the last few years, the attention has been posed on safe process optimization, that is how to compute the set of operating parameters able to ensure high reactor productivity and, contextually, safe conditions. To achieve this goal, with particular reference to industrial semibatch synthesis carried out using both isothermal and isoperibolic temperature control mode, a dedicated optimization software has been implemented. Such a software identifies the optimum set of operating parameters using a topological criterion able to bind the so-called “QFS region” (where reactants accumulation is low and all the heat released is readily removed by the cooling equipment) and, then, iteratively searching for the constrained system optimum. To manage the software, only a few experimental parameters are needed; essentially: heat(s) of reaction, apparent system kinetics (Arrhenius law), threshold temperature(s) above which unwanted side reactions, decompositions or boiling phenomena are triggered, heat transfer coefficients and reactants heat capacities. Such parameters can be obtained using simple calorimetric techniques (DSC, ARC, RC1, etc..). Over the optimization section, the software posses a simulation section where both normal and upset operating conditions (such as pumps failure and external fire) can be tested.

Safe optimization of potentially runaway processes using topology based tools and software

COPELLI, SABRINA;TORRETTA, VINCENZO
2012-01-01

Abstract

In chemical industries, fast and strongly exothermic reactions are often to be carried out to synthesize a number of intermediates and final desired products. Such processes can exhibit a phenomenon known as “thermal runaway” that consists in a reactor temperature loss of control. During the course of the years, lots of methods, aimed to detect the set of operating parameters (e.g., dosing times, initial reactor temperature, coolant temperature, etc..) at which such a dangerous phenomenon can occur, have been developed. Moreover, in the last few years, the attention has been posed on safe process optimization, that is how to compute the set of operating parameters able to ensure high reactor productivity and, contextually, safe conditions. To achieve this goal, with particular reference to industrial semibatch synthesis carried out using both isothermal and isoperibolic temperature control mode, a dedicated optimization software has been implemented. Such a software identifies the optimum set of operating parameters using a topological criterion able to bind the so-called “QFS region” (where reactants accumulation is low and all the heat released is readily removed by the cooling equipment) and, then, iteratively searching for the constrained system optimum. To manage the software, only a few experimental parameters are needed; essentially: heat(s) of reaction, apparent system kinetics (Arrhenius law), threshold temperature(s) above which unwanted side reactions, decompositions or boiling phenomena are triggered, heat transfer coefficients and reactants heat capacities. Such parameters can be obtained using simple calorimetric techniques (DSC, ARC, RC1, etc..). Over the optimization section, the software posses a simulation section where both normal and upset operating conditions (such as pumps failure and external fire) can be tested.
2012
11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012, PSAM11 ESREL 2012
9781622764365
11th International Probabilistic Safety Assessment and Management Conference and The Annual European Safety and Reliability Conference 2012
Helsinki
25-29 giugno 2012
File in questo prodotto:
File Dimensione Formato  
ESREL_Sabry.pdf

accesso aperto

Tipologia: Documento in Post-print
Licenza: DRM non definito
Dimensione 360.92 kB
Formato Adobe PDF
360.92 kB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11383/1760760
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact